At each turn, the wheels move throughout the depression space, through the rotation of a special handle or through an automatically acting device. When the contents of the recess are ready, the device is transferred to another recess, already filled with clay. In some brick industries, clay devices are driven by steam by means of cable transmission. At the production of air purification, you may need to be a sink that you can inexpensively here: Electrolux air washing. The clay cutter or clayelaine was widely used in manual brick industries. It consists of a quadrangular wooden or iron box or cylinder of approximately 2 meters high and 0.6 – 1.0 meters in diameter. Sometimes a cylinder, as shown in rice. 8 and 9 is made of brick (transverse incision – and plan). In the middle there is a vertical, equipped with knives, shaft. These knives are directed in such a way that they not only cut clay, but also promote it down. At the upper end of the shaft of the clay, the crossbar is strengthened, which is driven by equestrian thrust. Glinamy is installed in a room, usually divided into four compartments. Three departments are used to soak clay, and from the fourth, the processed mass is carried out. In large brick factories, with manual production, large clayers with steam engines are used. Typically, claymen are so high that the tables standing on wheels are filled directly under them and from there are already directed along the rails to certain places of molding. If the clay contains stones, slate or hardening that is not amenable to the brown, they use special auxiliary machines to fragment their. The cheapest and most productive grinding machine is a roller machine. It consists of two rolled rollers of the same size, strengthened on moving axes in a horizontal or slightly inclined direction.