Wall painting is one of the fastest ways to make repairs in any room. This is a very easy job and it does not require special skills, except to prepare the wall for coloring. Since the wall with your own hands is qualitatively? First, inspect the wall for various irregularities, eliminate them, and after that proceed to color. Decide on the materials and tools that you will need during work. From the tools you will need a bucket, spatula, chair or staircase, painting mesh, as well as sandpaper with grain size 120. It is best to use putty for walls as a material or epoxy aggregate. Also do not forget to carry out repairs in the bathroom after painting walls. Since the wall and ceiling can have cracks, first they need to be subsided, remove absolutely all the fallen particles from the cracks, after which, following the instructions on the package, stir the putty with water until a homogeneous thick mixture appears. Apply the paste to the gap with a small spatula and spread well, then remove the remnants of the mixture and smooth out so that there is absolutely no trace of the crack. Do such a procedure with all bumps. After that, clean them with sandpaper and check with your hand, whether you have to eliminate all the cracks. A perfectly flat wall – the key to high -quality wall painting. Now we start washing. To do this, you need to take soap powder or any other detergent and sponge.
Since the painting applied to the dirty wall will begin to crack very quickly, before applying the paint you just need to wash the wall from fat and dirt. Let the wall dry, after which you can start painting. Where to start painting the wall? To begin with, you will need a roller pallet, the roller itself, as well as matte emulsion paint. This method is the easiest and most convenient wall for painting. But since it will be very inconvenient to paint all the corners with a roller, you will also need a painting brush.
Of course, you can completely paint the entire wall with a brush, but it will take much more time, so it is better to combine the roller and brush during operation. Pour the paint into the roller tray, then immerse the roller into the paint and roll down the wall, moving the roller in different directions, evenly leveling the layers of paint over the entire wall. After you finish painting, let the walls dry well and enjoy the result of the work done.